ABB AG Uses Simulation to Verify Designs for a More Reliable Recloser
O. Craciun, and colleagues
ABB AG
Ladenburgh, Germany
When a tree branch touches overhead cables and causes a momentary short circuit, your lights may flicker. A device called a recloser ensures that power to your home is not cut off for a longer period.
ABB AG, a leading manufacturer in power technology, is working towards designing a more reliable recloser. One objective in this design process was to optimize the size of the permanent magnet while ensuring excellent switching properties.
To do this, ABB AG created a 2D simulation using the AC/DC Module and calculated the magnetic flux density. Next, they used the electrical circuit feature to couple the actual power amplifier schematic and component values to the magnetic simulation. Finally, the results were fed into optimization software to select the appropriate size magnet and imported back into COMSOL Multiphysics software using LiveLink™ for MATLAB® to verify the design in a 3D model.
Suggested Stories
Using Multiphysics Simulation to Prevent Building Damage
In addition to surviving normal winters, a strong building must be able to survive the worst winters expected in a 50 ...
Simulating the Pressure in an Ultrahigh Vacuum System
The ETpathfinder research facility in the Netherlands was built in anticipation of the proposed Einstein Telescope ...
A 100-Fold Improvement in Lithography Resolution Realized with a 150-Year-Old “Perfect Imaging” System
The idea of "perfect imaging", that is a resolution less than the wavelength of light producing the image, was first ...
Battling Corrosion in Nuclear Waste Storage Facilities
Nuclear sites in Italy are being decommissioned, leaving questions about how to safely manage and store radioactive ...
