Martin Beckmann-Kluge & Fabio Ferrero
BAM German Federal Institute for Materials Research & Testing, Berlin, Germany
BAM German Federal Institute for Materials Research & Testing in Berlin promotes industrial development by providing research and consultation on materials technology and chemical engineering. Their recent work has been in analyzing the process by which highly flammable TFE gas is converted into a solid called PTFE (polytetrafluoroethylene), or the non-stick coating commonly known as Teflon.
PlasticsEurope contacted BAM German Federal Institute for Materials Research & Testing for the creation of a mathematical model of the self-heating of TFE to determine the Maximum Ignition Temperature of Decomposition (MITD).
Using COMSOL Multiphysics, they were able to find six reactions taking place in the heated gas phase that were needed for an accurate model. Three physics interfaces in COMSOL Multiphysics were used: non-isothermal flow interface, convection and conduction interface, and convection and diffusion interface. The model now allows companies to determine if for a given reactor a specific pressure/temperature setting is not safe and then adapt their process.
Teflon is a registered trademark of E. I. du Pont de Nemours and Company.
Suggested Stories
Actuation Technique for Miniature Robots Developed using Multiphysics Simulation
Robotic devices for minimally invasive surgery procedures require flexible tools and careful actuation. But most ...
Designing the Gold Standard of Immersive Audio for Virtual Reality Gaming
Tectonic Audio Labs used electromagnetics, mechanical, and acoustics simulation to develop a state-of-the-art balanced ...
Fine-Tuning an HVAC System Design with Simulation
Do you find your office too hot, too cold, or just right? Using simulation, HVAC system engineers can assess indoor ...
Simulation Apps Advance Tribology Research
Modeling thermal elastohydrodynamically lubricated (TEHL) gear contacts quickly reveals a complex system of ...
