All Solutions
Segregated solver steps do not involve all components
Solution Number: 1191 Applies to: COMSOL Multiphysics Versions: All versionsAn error "Segregated solver steps do not involve all components" occurs. The groups for the segregated solver do not include all dependent variables. One reason for this error could be that some boundary conditions ...
Initial guess leads to undefined function value
Solution Number: 1192 Applies to: COMSOL Multiphysics Versions: All versionsAn error "Initial guess leads to undefined function value" occurs. This error message usually appears when you have set up an expression that returns “not a value”; that is, it is undefined for the initial condition ...
Maximum number of linear iterations reached
Solution Number: 1193 Applies to: COMSOL Multiphysics Versions: All versionsAn error "Maximum number of linear iterations reached" occurs. If you get this error, the iterative linear system solver did not converge due to a bad initial guess or a bad preconditioner. To avoid the error, increase ...
Singular Matrix
Solution Number: 1194 Applies to: COMSOL Multiphysics Versions: All versionsAn error "Singular matrix" occurs. The system matrix (Jacobian matrix or stiffness matrix) is singular, so the solver cannot invert it. Usually this means that the system is underdetermined. Check that all equations ...
License Error
Solution Number: 1195 Applies to: COMSOL Multiphysics Versions: All versionsI receive a license error when installing, or launching, COMSOL Multiphysics, There are separate Knowledge Base entries for the most common error messages users experience. See the list under Related Issues below. If ...
'Command not found' or 'No such file or directory' error when starting the license manager on Linux
Solution Number: 1199 Versions: All versionsWhen I try to start the license manager for COMSOL 5.0, or later, on my Linux distribution I get an error message saying: ./lmgrd: Command not found. or ./lmgrd: No such file or directory The license manager ...
Solving time dependent models with inconsistent initial values
Solution Number: 1172 Versions: All versionsA common mistake when setting up transient models is to have initial conditions that are inconsistent with the loads and boundary conditions. This occurs most often when running transient fluid flow studies, but the ...
COMSOL Multiphysics crashes when trying to access the documentation
Solution Number: 1178 Versions: 5.4, 5.3a, 5.3, 5.2aCOMSOL Multiphysics crashes when I try to access the documentation on my Linux Machine. With the release of COMSOL Multiphysics 5.4, the documentation will automatically be opened in an external web browser if ...
Improving Convergence of Nonlinear Stationary Models
Solution Number: 103 Versions: All versionsStationary (time-invariant) models with nonlinearities may converge very slowly. A nonlinearity can be introduced into the model either in the governing equation, or by making any of the material properties, loads, or ...
Error: Failed to Connect to Inventor LT
Solution Number: 1167 Versions: All versionsWhen I try to synchronize the geometry between COMSOL and Inventor LT, the error message Failed to connect to Inventor. Please make sure Inventor is running. is displayed. Inventor LT does not support third party ...