Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Particle size distribution in Li battery single particle model
Posted Apr 26, 2020, 11:58 a.m. EDT Battery Design 0 Replies
Please login with a confirmed email address before reporting spam
Hello, I want to add a particle size distribution to a negative electrode in Li battery single particle model. In fact, the goal is to define a multi particle model instead of a single particle model. For that, a Weibull distribution should be defined within a PSD range. How could I do that? The Weibull distribution is defined by: number fraction density=(k/λ)(R/λ)^(k-1)exp(-(R/λ)^k) Thanks for your help in advance.
Hello Sara Taslimi Taleghani
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.