Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Simulate eddy current induced by switching off current source in short time
Posted May 14, 2020, 1:02 p.m. EDT Electromagnetics, Low-Frequency Electromagnetics Version 5.3a 0 Replies
Please login with a confirmed email address before reporting spam
Hello,
I am using COMSOL to simulate eddy current induced by switching off current source in short time. The most simplified model consists of a single turn coil and a copper plate. By switching off current in coil, we should see eddy current in copper plate. Now I am using magnetic field to simulate this problem. The current is defined by a step function 10 * step(t[1/s]) [A]. For coil, I try both single conductor and multi-turn with N=1. However, I always get error. If I use single conductor, COMSOL complains current excitation is not supported. If I use multi-turn with N=1, COMSOL complains the result does not converge. So how can I simulate this problem.
Thanks, Yukai
Hello Yukai Lu
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.