Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Moving box in air

Posted Feb 19, 2012, 12:50 a.m. EST Version 4.2 1 Reply

JiYoung Park
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am simulating a moving box in air.

I defined moving box as a free deformation and prescribed mesh displacement(0.1*t) by Moving mesh method.

But the box was not moving.

Can you help?

Thanks

Attachments:

1 Reply Last Post Feb 20, 2012, 1:38 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 20, 2012, 1:38 a.m. EST
Hi

have you checked that its not a visual plot effect ? Difficult to propose anything else, as properly defined your model should have no problems to be set-up

--
Good luck
Ivar
Hi have you checked that its not a visual plot effect ? Difficult to propose anything else, as properly defined your model should have no problems to be set-up -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content