Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Semiconductor simulation

Posted Feb 20, 2012, 12:25 p.m. EST Low-Frequency Electromagnetics, MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Porous Media Flow, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.2a 0 Replies

Paolo Mazzucchi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi All,

I would like to simulate the Electric Field and the Current flow in a doped semiconductor (Si n-type doping 1e15cm^-3) with 2 elecctrodes on the top of the semiconductor surface.

I red the paper on the Semiconductor Diode, and they use the "convention and diffusion" module but i didn't understand how to apply this to my situation.

I hope that someone could help me,

Thank you all

Paolo Mazzucchi
0 Replies Last Post Feb 20, 2012, 12:25 p.m. EST
COMSOL Moderator

Hello Paolo Mazzucchi

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content