Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

varying density with depth

Posted Mar 2, 2012, 4:34 p.m. EST Materials Version 4.2a 1 Reply

Samuel Roy
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,
my friend and I wish to make a model that has material density dependent on distance from an upper boundary. Does anyone know how to write an equation that would vary density with distance from a boundary?

thanks,
Sam
1 Reply Last Post Mar 2, 2012, 5:28 p.m. EST
Alexander Kuznetsov
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 2, 2012, 5:28 p.m. EST
define a function of two arguments that will have desired density values vs. spatial coordinates x,y. Then use this function in material properties.
define a function of two arguments that will have desired density values vs. spatial coordinates x,y. Then use this function in material properties.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content