Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Solution not converging

Posted Jan 28, 2022, 3:24 a.m. EST Structural & Acoustics, Acoustics & Vibrations 1 Reply

Hitesh Kumbhare
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Warning display:

No mesh on domains 1 2 3 4 5 in geometry 1, mesh case 0. Not all domains are meshed.

1 Reply Last Post Jan 29, 2022, 3:32 p.m. EST
Robert Koslover Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 3 years ago Jan 29, 2022, 3:32 p.m. EST

You have to mesh the domains that contribute to your problem solution. Take a look at your mesh. If you still can't find what is causing the difficulty, consider posting your .mph file to the forum so that others can examine it and offer their suggestions.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
You have to mesh the domains that contribute to your problem solution. Take a look at your mesh. If you still can't find what is causing the difficulty, consider posting your .mph file to the forum so that others can examine it and offer their suggestions.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content