Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Question concerning coordinate systems in anisotropic materials
Posted Nov 23, 2023, 6:54 a.m. EST 0 Replies
Please login with a confirmed email address before reporting spam
Hello everybody,
I am currently working on a model that has a similar geometry to the wind turbine tutorial model developed by you :
I currently do not possess the composites extension.
My main objective is to simulate the heat transfer of said geometry using a single anisotropic material for the blades, with the thermal condictivity matrix similar as the following :
W/(m.K)
My question is rather simple :
Is the boundary system (created automatically) applied to the part during the heat transfer calculations ? If yes, does it take into account the rather complex geometry of the part or do I need to create a new coordinate system adapted to it ?
Thank you for your time !
Attachments:
Hello Daniel Adami
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.