Vortex street. Flow around a cylinder.

Joseba Martinez Lopez

Please login with a confirmed email address before reporting spam

Hello everyone! I am facing a rare problem in a CFD model and I hope someone can enlighten me. I am modeling a 2D external flow around a cylinder. Laminar regime, Re=200, forming vortex street, computational domain is about 70D in streamwise direction and 20D in perpendicular direction. I am doing a mesh dependence study. Even with coarse meshes the error against experimental data I am comparing is fairly low, around 1%, and it improves with finer meshes. But here comes the interesting part, the finer the mesh, the later the vortex street appears. With the finest meshes, I have to model for more than 70 seconds for the vortex street to appear. When I use a structured mesh of quadrilateral elements, the vortex shedding does not happen, even with more than 120 seconds of simulation time (Before this I was using triangular elements). This does confuse me. Maybe is it the time step or CFL?


0 Replies Last Post May 6, 2024, 7:46 a.m. EDT
COMSOL Moderator

Hello Joseba Martinez Lopez

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.