Diffusion through a porous membrane

Please login with a confirmed email address before reporting spam

Good evening everyone, I am trying to simulate the concentration exchange between a channel and a reservoir, separated by a porous membrane. I am using Laminar Flow and Transport of Diluted Species, but I am encountering some problems. Specifically, when I do not couple the multiphysics, the concentration in the reservoir changes based on the porosity as it should, but at the same time, if I change the flow in the channel, the concentration does not change. On the other hand, if I couple the multiphysics, I see no difference in diffusion with varying porosity, while I do see differences in diffusion when changing the flows. Does anyone have any advice? Thank you in advance.


0 Replies Last Post Sep 3, 2024, 4:14 p.m. EDT
COMSOL Moderator

Hello Davide Ciarrocchi

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.