2D topology optimization for natural convection heat sinks

Please login with a confirmed email address before reporting spam

Hi there,

I am trying to replicate the heat sink example shown in this paper "Topology Optimisation for Natural Convection Problems". However, i was not able to achieve a similar result shown in this paper I am not too sure what is the problem with my model.

Looking forward to your advice



1 Reply Last Post Oct 9, 2024, 3:50 a.m. EDT
Kristian Ejlebjærg Jensen COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 3 weeks ago Oct 9, 2024, 3:50 a.m. EDT

Hi Alex

A COMSOL engineer can give feedback on the model, if you upload it to comsol.com/support.

Best regards,

Kristian E. Jensen

Hi Alex A COMSOL engineer can give feedback on the model, if you upload it to comsol.com/support. Best regards, Kristian E. Jensen

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.