Uneven Results in Acoustic-Piezoelectric Coupled Analysis

Please login with a confirmed email address before reporting spam

Hello, I am a student studying numerical analysis. I have a question that came up while using COMSOL.

I am currently performing an acoustic-piezoelectric coupled frequency analysis. In the image, the lower area is the piezoelectric region, and the upper area is the acoustic medium. For the boundary conditions of the piezoelectric element, I applied a surrounding roller boundary condition, with Electric Potential boundary conditions of 0V and 0.1V at the top and bottom, respectively. In the analysis results, the voltage was applied correctly, but the z-displacement and acoustic pressure at the coupled boundary showed uneven results. This issue did not occur when I used the same boundary conditions in COMSOL version 3.5. What could be the reason for this?



2 Replies Last Post Nov 13, 2024, 6:34 a.m. EST
Acculution ApS Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 6 days ago Nov 13, 2024, 2:49 a.m. EST

Are you using the same mesh in the newest version vs 3.5?

-------------------
René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
Are you using the same mesh in the newest version vs 3.5?

Mads Herring Jensen COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 6 days ago Nov 13, 2024, 6:34 a.m. EST

Hi Sang Uk Park

I think this is best resolved if you send the model to support. This could be one of several issues.

Best regards Mads

Hi Sang Uk Park I think this is best resolved if you send the model to support. This could be one of several issues. Best regards Mads

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.