Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Coupling AC/DC Joule Heating and Thermoacoustics

Posted Feb 25, 2015, 2:13 p.m. EST Low-Frequency Electromagnetics, Acoustics & Vibrations, Heat Transfer & Phase Change 0 Replies

Andrew
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Is it possible to couple the AC/DC and Thermoacoustics module, such that an alternating current causes a change in temperature, which then causes a change in pressure? I can couple the AC/DC module with Heat Transfer and Fluid Flow to get pressure waves from the AC, but is it possible to directly couple the AC/DC module and Thermoacoustics module? Thanks!
0 Replies Last Post Feb 25, 2015, 2:13 p.m. EST
COMSOL Moderator

Hello Andrew

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content