Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
AC/DC + Movement (ale?)
Posted Apr 2, 2015, 7:21 a.m. EDT Low-Frequency Electromagnetics, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 5.0 0 Replies
Please login with a confirmed email address before reporting spam
I'm trying to simulate 2D axisymmetric system, composed by a two layers wire surrounded by a coil, the electromagnetic flux is guided by a flux concentrator that surrounds the thread and the coil.
My objective is to study the induction, the eddy currents and the forces in the wire.
In this case, the coil is connected to a constant current source and the eddy current are induced in the wire by moving it in the Z direccion.
How can I simulate it?
By the moment I’m trying to simulate the system using the ale physics but I’m probably not defining the system boundaries correctly.
So if someone could lend me a hand for:
- If the ale method is the proper one, how to define it.
- If there’s a more suitable method for the analysis explain me which one should I use and how.
I'd like to post the model but it's too heavy
Thanks,
Adrián
PD: I've alreay followed step by step www.comsol.com/community/forums/general/thread/26401/, and I managed to simulate it correctly though I'm not able to do it in my model.
Hello Adrián Artacho López
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.