Technical Papers and Presentations

Quick Search

Resources

White Papers and Application Notes

Bridging the Terahertz Gap
Modeling the Lithium-Ion Battery
Corrosion Protection
Battery Modeling
Modeling and Simulation in Fuel Cell Development

Reacting Flows in Industrial Duct-burners of a Heat Recovery Steam Generator

G. Petrone[1], G. Cammarata[1], S. Caggia[2], and M. Anastasi[2]
[1]Department of Industrial and Mechanical Engineering, University of Catania, Catania, Italy
[2]Engineering Maintenance - ISAB Energy Services, Priolo Gargallo, Italy

Published in 2008

In this study, COMSOL Multiphysics is applied in order to simulate reacting flows for duct burner systems arranged in the post-firing section of a Heat Recovery Steam Generator of a combined cycle power plant.

Two- and three-dimensional simulations are carried out in order to investigate on operative conditions mainly responsible of duct burners overheating.

The results are obtained for several chemical compositions of the supplied fuel and for several values of the fuel mass flow rate incoming inside the control volume.

Download

Petrone_pres.pdf - 5.96MB
Petrone.pdf - 1.74MB