Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Applied a 2D profil on a subdomain

Posted Mar 8, 2012, 11:25 a.m. EST RF & Microwave Engineering, Geometry, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 3.5a 0 Replies

Romain Dauliat
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,
I work on fiber design and i would implement one subdomain of my structure with a 2D refractive index profile which come from a .txt file.
So I thought to use the following way :
Options -> Functions-> New... -> Interpolation -> File -> Browse
but in this case Comsol generate a lot of functions named "name1" to "name1000".
In my input .txt file (1001x1001 cases), i placed on the first line an column the x and y position.


Thanks for your help.
0 Replies Last Post Mar 8, 2012, 11:25 a.m. EST
COMSOL Moderator

Hello Romain Dauliat

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content