Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

pulse

Posted Mar 13, 2012, 8:34 a.m. EDT 2 Replies

hassan soliman
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear Sir

i want to apply voltage source in the form of pulse train with ampliude 13kV
and freq.1000 Hz on cable termination to see its effect on temperature

after 40min. I can not solve it by time dependent solver , itl will take horriable time!

what can i do?
2 Replies Last Post Mar 13, 2012, 12:42 p.m. EDT
Edgar Kaiser
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 13, 2012, 9:09 a.m. EDT
You could try to determine the heat flow at the terminal in a stationary model and use this result in a time dependent heat exchange model that doesn't need to resolve the AC waveform.

Cheers
Edgar
You could try to determine the heat flow at the terminal in a stationary model and use this result in a time dependent heat exchange model that doesn't need to resolve the AC waveform. Cheers Edgar
hassan soliman
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 13, 2012, 12:42 p.m. EDT
Dear Sir

could you please , give me some detetails about that solution. how i can get the heat flow?
Dear Sir could you please , give me some detetails about that solution. how i can get the heat flow?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content