Visualizing results for different modes in a parameter sweep

Please login with a confirmed email address before reporting spam

Hello everyone,

I am performing simulations on a CPW using the RF module Boundary Mode Analysis to find several propagating modes. I am running a Parametric Sweep for one geometry parameter and it seems that I cannot access all of the modes that the Boundary Mode Analysis finds. COMSOL only allows me to see one (I assume the one that finds last). I would like to know if anyone knows how to force COMSOL to store the results of all of the modes.

I uploaded some screenshots of the Study configuration I have. The parameter I am trying to sweep for is D0, when going to the results I cannot choose which mode to select.

Thank you.



0 Replies Last Post Aug 2, 2024, 11:09 a.m. EDT
COMSOL Moderator

Hello Nicolas Santos

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.